Welcome to the official website of Zhongshan Tiansheng Machinery Equipment Co., Ltd.!

Service Hotline:

13531819128

0760-22824807

氣門設(shè)備

Learn about the independent entry and exit of the valve lathe system

Learn about the independent entry and exit of the valve lathe system

Date of release:2018-08-13 Author:Tiansheng Click:


    In addition to the tailstock type, the valve lathe also has the top function. The standard type and the economic type have the tool holder II as the top function. When the tool holder II is closed for the top function, the tool holder II and the tool holder I have similar functions, and have punching, outer circle (vehicle step), tapping, and car taper. Conventional functions such as slotting, inner hook groove, and flat chamfering.


氣門設(shè)備


     In the old version of the system, when the tool holder II is opened as a top in the normal situation, the tool holder II will immediately hold the part after the chuck is tightened, and then enter the other tool holder. After the tool holder is finished, the tool holder II The tip is automatically retracted, and finally the collet release part is automatically taken out of the machine.




     The valve lathe and the new version system can perform the other functions such as center hole, punching, flat head or chamfering before the part of the tool holder II is placed. The tool holder II then enters to hold the part and continue to process the outer circle. , slotting, chamfering, etc., then the top exit, the end face or hole is machined again, and finally the collet release part is automatically taken out of the machine.

The address of this article:http://m.laquintademahler.com/en/news/378.html

Key word:氣門磨床,氣門車床,氣門設(shè)備

The last one:None
The next one:Safety precautions for using valve lathes

Recently browse:

Please leave a message for us
Please input the message here, and we will contact you as soon as possible.
name
Contacts
Telephone
Telephone
mailbox
mailbox
address
address